Guardian Metal Resources PLC Announces Pilot Mountain - Significant Drilling Results - GoldDiscovery.com

Guardian Metal Resources PLC Announces Pilot Mountain - Significant Drilling Results

Date/time :	2025-03-03 01:00 AM
Symbol :	GMET
Company :
Price :
Market cap :
O/S :
Exchange :	LSE
Industry :	Industrial Metals

Full story

Guardian Metal Resources PLC Announces Pilot Mountain - Significant Drilling Results

Desert Scheelite: Further Very High-Grade Tungsten & Silver Results

LONDON, UNITED KINGDOM / ACCESS Newswire / March 3, 2025 / Guardian Metal Resources plc (LON:GMET)(OTCQX:GMTLF)('Guardian Metal' or the 'Company'), a strategic mineral exploration and development company focused in Nevada, USA, is pleased to announce further drillhole assay results from the Company's ongoing drilling campaign at its 100% owned Pilot Mountain tungsten Project ("Pilot Mountain" or the "Project") located in Nevada, USA.

Laboratory assay results from drill core samples have been received from the next batch of drillholes at the Desert Scheelite zone covering PM24-029 to PM24-039 (Table 1) with some further very high-grade tungsten and silver results being intersected (Table 2). To date, 51 drillholes have been completed.

The final planned drillholes into Desert Scheelite will be completed in the following weeks following which attention will be turned to geotechnical drilling to support the planned pre-feasibility study. The Company is also finalising the first ever geological model for the Gunmetal zone with drillholes to planned thereafter. Guardian has also received a Notice Level permit which allows for the excavation of 20 drill pads at the Project's 'Garnet' tungsten-copper-silver-zinc zone. Finally, preliminary drill planning is underway to target the newly discovered mineralised copper breccia zone within the Porphyry South target area located immediately south of Desert Scheelite.

Oliver Friesen, CEO of Guardian Metal, commented:

"As the need for a domestic U.S. mined source of tungsten continues to accelerate, we are pleased to able to produce another positive set of drilling results from the ongoing Pilot Mountain drilling campaign.

"Our Nevada based operating team is working hard to complete the final few Desert Scheelite drillholes, following the completion of which, they will commence work on the geotechnical drillholes to support the Project's pre-feasibility study. Work is also being progressed at the Project's Garnet and Gunmetal zones which host polymetallic tungsten-silver-copper-zinc mineralisation very similar to what is found at Desert Scheelite. We consider these as being low-hanging fruit targets given the historical widely-spaced drilling which uncovered significant intervals of skarn-style polymetallic mineralisation.

"We are also pleased to report that initial preparations are now underway for the Company's first ever boots on the ground work programme at Tempiute and we anticipate providing an update to the market covering more details in short order.

"As work progresses across our Nevada-based tungsten portfolio, the push to secure domestic supplies of critical and defence-related metals only strengthens the strategic positioning of Guardian Metal Resources within the U.S. and abroad."

Desert Scheelite Highlights:

Of significance within this particular batch of results is the mineralised widths (>0.10% WO₃) encountered throughout several holes as well as the intersection of multiple broad mineralised intervals. These include mineralised 14.2m and 7.8m intervals in PM24-029, 19.4m and 27m intervals in PM24-031, 18.5m and 18.2m intervals in PM24-038 as well as multiple others throughout the holes reported herein
Some of the most significant individual silver results from the 2024/2025 drilling programme were received from this batch of results including 434g/t (PM24-034), 345g/t (PM24-038), and two 355g/t Ag results from PM24-038.
Drillhole PM24-034 highlight downhole intersections

o 27.1m @ 0.46% W0₃, 32g/t Ag,3,278ppm Cu & 0.71% Zn from 20.7 - 47.8m (27.1m @ 0.72% WO₃Eq* or 2.35% CuEq**); including

- 5.3m @ 1.08% W0_3, 130.5g/t Ag, 2,382ppm Cu & 0.32% Zn from 34.2 - 39.5 (5.3m @ 1.57% WO₃Eq* or 5.15% CuEq**)

Drillhole PM24-038 highlight downhole intersection

o 18.5m @ 0.28% W0₃, 55.1g/t Ag,353ppm Cu & 0.26% Zn from 27 - 45.5m (18.5m @ 0.48% WO₃Eq* or 1.57% CuEq**); and

o 18.2m @ 0.25% W0₃, 97.6g/t Ag,802ppm Cu & 1.03% Zn from 58 - 76.2m (18.2m @ 0.66% WO₃Eq* or 2.17% CuEq**); including

- 6.0m @ 0.24% W0_3, 253.3g/t Ag, 205ppm Cu & 1.09% Zn from 58 - 64m (6.0m @ 1.11% WO₃Eq* or 3.64% CuEq**).

Drillhole PM24-039 highlight downhole intersection

o 7.5m @ 0.21% W03, 2.9g/t Ag, 125ppm Cu & 0.12% Zn from 26.5 - 34m (7.5m @ 0.23% WO3Eq* or 0.75% CuEq**); and

o 12.1m @ 0.35% W03, 57.2g/t Ag, 5103ppm Cu & 0.98% Zn from 41.8 - 53.9m (12.1m @ 0.76% WO3Eq* or 2.50% CuEq**).

^*,**Copper and W0₃ Equivalent ("WO₃Eq") are calculated using a tungsten price of US $337.5/MTU, a zinc price of US$1.263/lb, a copper price of US$4.57/lb and a silver price of US$31.12/Oz.

Cautionary note: The metal equivalent calculations do not consider any metallurgical factors and assume 100% recovery and 100% payability of all metals, as a result the stated equivalents are provided for illustrative purposes only.

Results

Table 1: 2024 Drillhole collar table (this RNS)

Hole ID	Zone	UTM Easting^#	UTM Northing^#	Azimuth (deg.)	Dip (deg.)	Down hole Depth (m)
PM24-029	Desert Scheelite	424200.7	4248327	184.11	-53.3	81.7
PM24-030	Desert Scheelite	423858.6	4248208	180.58	-73.1	85.04
PM24-031	Desert Scheelite	423848.3	4248234	184.95	-83.3	125.9
PM24-032	Desert Scheelite	423810	4248226	178.37	-73.3	106.1
PM24-033	Desert Scheelite	423907.9	4248249	186.51	-47.7	78.0
PM24-034	Desert Scheelite	423957.7	4248283	178.08	-53.4	98.45
PM24-035	Desert Scheelite	423933.5	4248276	184.43	-64.9	90.0
PM24-036	Desert Scheelite	423907.8	4248271	179.86	-50.0	42.7
PM24-037	Desert Scheelite	423907.7	4248270	182.34	-51.0	84.4
PM24-038	Desert Scheelite	423979.5	4248290	175.62	-56.4	91.44
PM24-039	Desert Scheelite	424018.3	4248296	183.97	-61.2	78.0

^#UTM Zone 11 North NAD83 datum

Table 2: Significant Diamond Drillhole Assay Results¹

Hole ID	Downhole Depth (m)		Interval (m)	W	W	WO3		Zn		Ag	Cu	Intersection Composites
	From	To	Interval (m)	(ppm) a	(%) b	(%) c		(%) d		(g/t) a	(ppm) a	(weighted averages) c
PM24-029	42.8	44.5	1.70	1,330	-	0.17	Δ	0.31		1.7	392	14.2m @ 0.25% WO3 , 0.04% Cu , 0.98% Zn & 5.05 g/t Ag
	44.5	46.0	1.50	2,380	0.31	0.31		1.54	Ø	7.6	1,160
	46.0	46.7	0.70	2,060	0.56	0.56		2.22	Ø	14.2	2,360
	46.7	48.5	1.80	2,970	0.38	0.38		1.85	Ø	1.4	507
	48.5	50.0	1.50	1,180	-	0.15	Δ	0.37		17.8	170
	50.0	51.5	1.50	1,020	-	0.13	Δ	0.80		9.8	150
	51.5	53.0	1.50	1,330	-	0.17	Δ	0.02		-	57
	53.0	54.5	1.50	1,650	-	0.21	Δ	0.43		0.5	135
	54.5	56.0	1.50	2,220	0.29	0.29		2.45	Ø	0.6	165
	56.0	57.0	1.00	2,280	0.31	0.31		0.15		1.9	30
PM24-029	68.7	70.2	1.50	1,460	-	0.18	Δ	0.09		1.4	56	7.8m @ 0.21% WO3, 0.04% Cu, 0.9% Zn & 11.82 g/t Ag
	70.2	71.7	1.50	1,730	-	0.22	Δ	0.06		0.7	49
	71.7	73.2	1.50	660	-	0.08	Δ	0.12		20.4	48
	73.2	74.7	1.50	2,480	0.34	0.34		1.33	Ø	36.5	615
	74.7	75.7	1.00	1,790	-	0.23	Δ	3.66	Ø	1.8	870
	75.7	76.5	0.80	1,390	-	0.18	Δ	1.21	Ø	2.4	1,195
PM24-030	17.4	18.4	1.00	1,670	-	0.21	Δ	0.04		3.2	105	2.6m @ 0.28% WO3, 0.01% Cu, 0.03% Zn & 2.46 g/t Ag
PM24-030	18.4	20.0	1.60	2,430	0.33	0.33		0.02		2.0	38	2.6m @ 0.28% WO3, 0.01% Cu, 0.03% Zn & 2.46 g/t Ag
PM24-030	26.0	27.5	1.50	3,130	0.81	0.81		0.06		1.7	35	3m @ 0.53% WO3, 0% Cu, 0.04% Zn & 1.5 g/t Ag
PM24-030	27.5	29.0	1.50	1,980	-	0.25	Δ	0.02		1.3	20	3m @ 0.53% WO3, 0% Cu, 0.04% Zn & 1.5 g/t Ag
PM24-030	33.5	35.0	1.50	1,850	-	0.23	Δ	0.08		0.9	93	10.5m @ 0.33% WO3, 0% Cu, 0.05% Zn & 2.36 Ag
	35.0	36.5	1.50	1,660	-	0.21	Δ	0.05		1.3	31
	36.5	38.0	1.50	2,010	0.27	0.27		0.07		1.1	51
	38.0	39.5	1.50	2,300	0.33	0.33		0.05		0.9	34
	39.5	41.0	1.50	980	-	0.12	Δ	0.05		0.7	19
	41.0	42.5	1.50	2,600	0.44	0.44		0.03		10.2	27
	42.5	44.0	1.50	3,400	0.69	0.69		0.02		1.4	28
PM24-030	63.1	64.2	1.10	3,200	0.75	0.75		0.00		-	29	3.4m @ 0.36% WO3, 0.01% Cu, 0.02% Zn & 0.22 g/t Ag
	64.2	65.0	0.80	1,320	-	0.17	Δ	0.02		-	51
	65.0	66.5	1.50	1,390	-	0.18	Δ	0.03		0.5	65
PM24-031	30.1	31.8	1.70	2,370	0.32	0.32		0.01		0.9	82	1.7m @ 0.32% WO3, 0.01% Cu, 0.01% Zn & 0.9 g/t Ag
PM24-031	51.3	52.8	1.50	3,450	0.54	0.54		0.01		-	18	19.4m @ 0.26% WO3, 0% Cu, 0.03% Zn & 2.35 Ag
	52.8	54.3	1.50	3,590	0.50	0.50		0.01		-	24
	54.3	55.8	1.50	760	-	0.10	Δ	0.03		-	39
	55.8	57.3	1.50	1,550	-	0.20	Δ	0.01		-	23
	57.3	58.8	1.50	30	-	0.00	Δ	0.02		-	14
	58.8	60.3	1.50	1,130	-	0.14	Δ	0.02		-	58
	60.3	61.8	1.50	2,090	0.28	0.28		0.01		-	9
	61.8	63.2	1.40	1,260	-	0.16	Δ	0.16		19.1	41
	63.2	64.7	1.50	2,090	0.28	0.28		0.01		-	23
	64.7	66.2	1.50	1,280	-	0.16	Δ	0.03		4.6	53
	66.2	67.7	1.50	2,410	0.33	0.33		0.02		2.6	102
	67.7	69.2	1.50	1,280	-	0.16	Δ	0.01		0.7	75
	69.2	70.7	1.50	3,760	0.52	0.52		0.03		4.7	16
PM24-031	82.7	84.2	1.50	1,590	-	0.20	Δ	0.07		27.0	49	27m @ 0.29% WO3, 0.01% Cu, 0.02% Zn & 3.09 g/t Ag
	84.2	85.7	1.50	2,160	0.59	0.59		0.02		0.5	28
	85.7	87.2	1.50	2,460	0.34	0.34		0.01		0.6	41
	87.2	88.7	1.50	3,210	0.45	0.45		0.01		1.7	35
	88.7	90.2	1.50	550	-	0.07	Δ	0.02		-	33
	90.2	91.7	1.50	50	-	0.01	Δ	0.01		-	16
	91.7	93.2	1.50	2,700	0.37	0.37		0.01		-	47
	93.2	94.7	1.50	3,930	0.60	0.60		0.02		-	32
	94.7	96.2	1.50	2,050	0.51	0.51		0.03		2.5	98
	96.2	97.7	1.50	2,100	0.28	0.28		0.03		1.3	25
	97.7	99.2	1.50	2,300	0.29	0.29		0.02		-	7
	99.2	100.7	1.50	430	-	0.05	Δ	0.03		4.3	83
	100.7	102.2	1.50	2,240	0.29	0.29		0.03		7.2	39
	102.2	103.7	1.50	1,240	-	0.16	Δ	0.02		2.8	49
	103.7	105.2	1.50	3,490	0.47	0.47		0.02		1.3	108
	105.2	106.7	1.50	420	-	0.05	Δ	0.02		1.9	51
	106.7	108.2	1.50	1,200	-	0.15	Δ	0.02		1.7	74
	108.2	109.7	1.50	2,330	0.32	0.32		0.02		2.8	211
PM24-032	64.2	65.7	1.50	2,180	0.28	0.28		0.02		2.4	99	1.5m @ 0.28% WO3, 0.01% Cu, 0.02% Zn & 2.4 g/t Ag
PM24-033	7.5	9.0	1.50	2,710	0.44	0.44		0.03		3.1	89	14.6m @ 0.14% WO3, 0.01% Cu, 0.08% Zn & 4.38 g/t Ag
	9.0	10.5	1.50	470	-	0.06	Δ	0.03		3.1	109
	10.5	12.0	1.50	130	-	0.02	Δ	0.06		3.8	49
	12.0	13.5	1.50	1,030	-	0.13	Δ	0.04		2.0	54
	13.5	15.0	1.50	350	-	0.04	Δ	0.06		6.1	29
	15.0	16.2	1.20	1,110	-	0.14	Δ	0.07		2.3	11
	16.2	17.7	1.50	400	-	0.05	Δ	0.20		3.6	45
	17.7	19.3	1.60	290	-	0.04	Δ	0.10		3.6	30
	19.3	20.6	1.30	1,010	-	0.13	Δ	0.09		2.5	26
	20.6	22.1	1.50	2,360	0.39	0.39		0.16		13.1	53
PM24-033	44.8	46.3	1.50	1,410	-	0.18	Δ	1.19	Ø	66.8	801	9m @ 0.2% WO3, 0.02% Cu, 0.3% Zn & 13.57 g/t Ag
	46.3	47.8	1.50	1,230	-	0.16	Δ	0.33		7.3	224
	47.8	49.3	1.50	2,000	0.26	0.26		0.10		3.8	57
	49.3	50.8	1.50	660	-	0.08	Δ	0.05		1.3	23
	50.8	52.3	1.50	1,620	-	0.20	Δ	0.05		1.0	47
	52.3	53.8	1.50	2,350	0.33	0.33		0.07		1.2	184
PM24-034	20.7	22.2	1.50	2,040	0.28	0.28		0.10		2.0	187		27.1m @ 0.46% WO3, 0.33% Cu, 0.71% Zn & 32 g/t Ag
	22.2	23.7	1.50	1,740	-	0.22	Δ	0.14		5.0	144
	23.7	25.2	1.50	2,820	0.44	0.44		0.06		0.9	125
	25.2	26.7	1.50	2,380	0.46	0.46		0.20		3.9	356
	26.7	28.2	1.50	1,600	-	0.20	Δ	0.33		3.7	928
	28.2	29.7	1.50	1,040	-	0.13	Δ	1.64	Ø	18.0	6,450
	29.7	31.2	1.50	2,060	0.63	0.63		2.23	Ø	41.4	13,700
	31.2	32.7	1.50	2,500	0.53	0.53		1.85	Ø	9.3	7,550
	32.7	34.2	1.50	2,400	0.32	0.32		0.88		12.8	6,220
	34.2	35.7	1.50	6,730	1.20	1.20		0.72		23.8	4,480	5.3m @ 1.08% WO3, 0.24% Cu, 0.32% Zn & 130.05 g/t Ag
	35.7	36.8	1.10	10,000	1.62	1.62		0.15		434.0	3,650
	36.8	38.2	1.40	2,570	0.32	0.32		0.03		99.0	603
	38.2	39.5	1.30	3,960	1.30	1.30		0.31		28.9	808
	39.5	41.8	2.30	-	-	-	Δ	-		-	-
	41.8	44.8	3.00	840	-	0.11	Δ	1.37	Ø	2.1	2,490
	44.8	46.3	1.50	4,790	0.78	0.78		1.13	Ø	15.8	7,700
	46.3	47.8	1.50	2,060	0.28	0.28		0.42		1.6	2,460
PM24-035	20.1	21.7	1.60	4,310	0.77	0.77		0.12		17.0	236	6.1m @ 0.3% WO3, 0.01% Cu, 0.08% Zn & 9.2 g/t Ag
	21.7	23.2	1.50	420	-	0.05	Δ	0.09		10.7	112
	23.2	24.7	1.50	1,330	-	0.17	Δ	0.04		4.2	80
	24.7	26.2	1.50	1,330	-	0.17	Δ	0.04		4.4	78
PM24-035	8.2	9.8	1.6	2,520	0.35	0.35		0.01		2.1	518	1.6m @ 0.35% WO3, 0.05% Cu, 0.01% Zn & 2.1 g/t Ag
	35.2	36.7	1.50	3,230	0.55	0.55		0.04		4.3	81	14.2m @ 0.52% WO3, 0.04% Cu, 0.09% Zn & 5.19 g/t Ag
	36.7	38.2	1.50	3,880	0.54	0.54		0.02		4.3	40
	38.2	39.7	1.50	3,650	0.57	0.57		0.04		17.5	113
	39.7	41.2	1.50	3,700	0.58	0.58		0.07		11.7	121
	41.2	42.7	1.50	2,410	0.39	0.39		0.02		1.2	137
	42.7	44.2	1.50	1,400	-	0.18	Δ	0.06		1.9	277
	44.2	45.7	1.50	1,350	-	0.17	Δ	0.22		3.3	1,185
	45.7	47.2	1.50	6,960	0.99	0.99		0.12		1.4	465
	47.2	48.7	1.50	5,340	0.70	0.70		0.09		0.6	198
	48.7	49.4	0.70	4,020	0.52	0.52		0.31		6.3	3,260
PM24-036	34.6	36.1	1.50	1,050	-	0.13	Δ	0.56		20.1	284	8.1m @ 0.15% WO3, 0.02% Cu, 0.45% Zn & 33.07 g/t Ag
	36.1	37.6	1.50	400	-	0.05	Δ	0.55		8.2	382
	37.6	38.6	1.00	180	-	0.02	Δ	0.08		2.4	82
	38.6	40.0	1.40	1,790	-	0.23	Δ	0.44		18.4	70
	40.0	41.5	1.50	2,090	0.26	0.26		0.60		105.0	166
	41.5	42.7	1.20	1,150	-	0.15	Δ	0.31		33.1	139
PM24-037	32.5	34.0	1.50	1,260	-	0.16	Δ	0.16		6.2	60	1.5m @ 0.16% WO3, 0.01% Cu, 0.16% Zn & 6.2 g/t Ag
PM24-037	40.0	41.5	1.50	1,370	-	0.17	Δ	0.14		5.8	15	1.5m @ 0.17% WO3, 0% Cu, 0.14% Zn & 5.8 g/t Ag
PM24-037	49.0	50.5	1.50	1,660	-	0.21	Δ	0.43		90.6	161	3m @ 0.21% WO3, 0.01% Cu, 0.41% Zn & 127.3 g/t Ag
PM24-037	50.5	52.0	1.50	1,650	-	0.21	Δ	0.39		164.0	128	3m @ 0.21% WO3, 0.01% Cu, 0.41% Zn & 127.3 g/t Ag
PM24-037	62.5	64.0	1.50	600	-	0.08	Δ	1.06	Ø	120.0	328	7.5m @ 0.18% WO3, 0.03% Cu, 0.46% Zn & 46.4 g/t Ag
	64.0	65.5	1.50	1,880	-	0.24	Δ	0.55		100.0	244
	65.5	67.0	1.50	1,570	-	0.20	Δ	0.17		2.9	170
	67.0	68.5	1.50	1,460	-	0.18	Δ	0.28		1.2	138
	68.5	70.0	1.50	1,800	-	0.23	Δ	0.23		7.9	371
PM24-038	27.0	27.7	0.70	4,400	0.60	0.60		0.09		2.2	187	18.5m @ 0.28% WO3, 0.04% Cu, 0.26% Zn & 55.11 g/t Ag
	27.7	30.8	3.10	2,990	0.42	0.42		0.10		1.3	61
	30.8	32.3	1.50	2,900	0.39	0.39		0.09		1.4	31
	32.3	33.8	1.50	1,910	-	0.24	Δ	0.07		0.8	41
	33.8	35.7	1.90	650	-	0.08	Δ	0.18		3.7	163
	35.7	37.2	1.50	530	-	0.07	Δ	0.18		4.4	56
	37.2	38.7	1.50	2,820	0.37	0.37		0.85		101.0	1,215
	38.7	40.2	1.50	430	-	0.05	Δ	0.35		52.8	120
	40.2	41.8	1.60	2,400	0.32	0.32		0.53		286.0	730
	41.8	42.6	0.80	4,590	0.63	0.63		0.61		345.0	2,940
	42.6	45.5	2.90	1,670	-	0.21	Δ	0.16		11.3	66
PM24-038	58.0	59.5	1.50	2,930	0.49	0.49		1.37	Ø	355.0	176	6m @ 0.24% WO3, 0.02% Cu, 1.09% Zn & 253.25 g/t Ag	18.2m @ 0.25% WO3, 0.08% Cu, 1.03% Zn & 97.64 g/t Ag
	59.5	61.0	1.50	1,410	-	0.18	Δ	0.98		355.0	140
	61.0	62.5	1.50	1,710	-	0.22	Δ	1.04	Ø	129.0	122
	62.5	64.0	1.50	740	-	0.09	Δ	0.97		174.0	382
	64.0	65.5	1.50	2,410	0.32	0.32		1.80	Ø	66.5	1,070
	65.5	67.2	1.70	1,300	-	0.16	Δ	1.27	Ø	13.2	1,410
	67.2	68.7	1.50	1,400	-	0.18	Δ	1.84	Ø	19.2	3,380
	68.7	70.2	1.50	2,040	0.29	0.29		0.88		44.2	970
	70.2	71.7	1.50	400	-	0.05	Δ	0.53		4.3	484
	71.7	73.1	1.40	1,690	-	0.21	Δ	1.11	Ø	5.4	363
	73.1	74.6	1.50	2,770	0.40	0.40		0.44		6.1	448
	74.6	76.2	1.60	3,060	0.46	0.46		0.18		10.7	581
PM24-039	26.5	27.9	1.40	1,650	-	0.21	Δ	0.17		3.9	248	7.5m @ 0.21% WO3, 0.01% Cu, 0.12% Zn & 2.91 g/t Ag
	27.9	29.4	1.50	2,040	0.28	0.28		0.07		1.5	100
	29.4	30.9	1.50	1,150	-	0.15	Δ	0.08		2.0	138
	30.9	32.4	1.50	1,430	-	0.18	Δ	0.14		2.3	60
	32.4	34.0	1.60	1,730	-	0.22	Δ	0.15		4.8	92
PM24-039	41.8	43.3	1.50	3,650	0.52	0.52		2.18	Ø	106.0	15,150	12.1m @ 0.35% WO3, 0.51% Cu, 0.98% Zn & 57.24 Ag
	43.3	44.2	0.90	2,470	0.33	0.33		0.85		17.4	3,990
	44.2	45.7	1.50	2,320	0.32	0.32		0.90		46.0	8,200
	45.7	47.5	1.80	2,820	0.41	0.41		1.34	Ø	38.5	9,820
	47.5	49.1	1.60	3,580	0.64	0.64		0.82		201.0	1,820
	49.1	50.7	1.60	2,030	0.27	0.27		0.66		17.4	1,095
	50.7	52.2	1.50	1,250	-	0.16	Δ	0.42		9.8	100
	52.2	53.9	1.70	1,310	-	0.17	Δ	0.60		9.1	381

Table 2 notes:

Summary of certificated assay results provided by accredited laboratory ALS USA Inc
ppm: parts per million, 10,000 ppm = 1%
a: ALS method ME-ICP61;
b: WO₃ % calculated as W % multiplied by 1.2611
c: ALS method Zn-OG62
Δ: denotes WO₃ % calculated using W ppm (method ME-XRF15c)
F: denotes Zn % calculated using Zn ppm (method ME-ICP61)

Figure 1: 2025 drillhole plan map showing the location of all holes drilled to date. Red drill collars represent holes for which assays have been reported, yellow collars are holes still to be reported.

References

1: ALS USA Inc. analytical method utilised: ME-ICP61 for all samples, with ME-ICP61 overlimit samples also analysed using Ore Grade packages Ag-OG62, Cu-OG62, Pb-OG62, Zn-OG62, and W-XRF15c for high-grade tungsten.

This announcement contains inside information for the purposes of Article 7 of EU Regulation 596/2014 (which forms part of domestic UK law pursuant to the European Union (Withdrawal) Act 2018). The Directors of the Company are responsible for the contents of this announcement.

COMPETENT PERSON STATEMENT
The technical information contained in this disclosure has been read and approved by Mr Nick O'Reilly (MSc, DIC, MIMMM QMR, MAusIMM, FGS), who is a qualified geologist and acts as the Competent Person under the AIM Rules - Note for Mining and Oil & Gas Companies. Mr O'Reilly is a Principal consultant working for Mining Analyst Consulting Ltd which has been retained by Guardian Metal Resources plc to provide technical support.

Forward Looking Statements

This announcement contains forward-looking statements relating to expected or anticipated future events and anticipated results that are forward-looking in nature and, as a result, are subject to certain risks and uncertainties, such as general economic, market and business conditions, competition for qualified staff, the regulatory process and actions, technical issues, new legislation, uncertainties resulting from potential delays or changes in plans, uncertainties resulting from working in a new political jurisdiction, uncertainties regarding the results of exploration, uncertainties regarding the timing and granting of prospecting rights, uncertainties regarding the timing and granting of regulatory and other third party consents and approvals, uncertainties regarding the Company's or any third party's ability to execute and implement future plans, and the occurrence of unexpected events.

Actual results achieved may vary from the information provided herein as a result of numerous known and unknown risks and uncertainties and other factors.

For further information visit www.Guardianmetalresources.com or contact the following:

Guardian Metal Resources plc Oliver Friesen (CEO)	Tel:+44 (0) 20 7583 8304
Cairn Financial Advisers LLP Nominated Adviser Sandy Jamieson/Jo Turner/Louise O'Driscoll	Tel: +44 20 7213 0880
Shard Capital Partners LLP Broker Damon Heath/Erik Woolgar	Tel: +44 (0) 20 7186 9000

This information is provided by RNS, the news service of the London Stock Exchange. RNS is approved by the Financial Conduct Authority to act as a Primary Information Provider in the United Kingdom. Terms and conditions relating to the use and distribution of this information may apply. For further information, please contact rns@lseg.com or visit www.rns.com.

SOURCE: Guardian Metal Resources PLC

View the original press release on ACCESS Newswire

ACCESS Newswire

March 2, 2025 - 11:00 PM PST

News by QuoteMedia