PR Newswire
TORONTO , Sept. 6, 2022 /PRNewswire/ - O3 Mining Inc. (TSX.V: OIII) (OTCQX: OIIIF) ("O3 Mining" or the "Corporation") is pleased to announce the completion of the Pre-Feasibility Study ("PFS"), prepared in accordance with the National Instrument 43-101 – Standards of Disclosure for Mineral Projects ("NI 43-101"), for its 100% owned Marban Engineering gold project, in the world-class mining region of Val-d'Or in Québec, Canada . All figures are expressed in Canadian dollars unless otherwise stated.
- Robust Project Economics: Post-tax net present value ("NPV") (discount rate 5%) of C$463 million and post-tax unlevered internal rate of return ("IRR") of 23.2% using a long-term gold price of US$1,700 per ounce and an exchange rate of C$1.00 = US$0.77 .
- Increased production profile: Annual average production increased from 115,000 ounces of gold ("oz Au") in the Preliminary Economic Assessment ("PEA") to 161,000 oz Au supported by a 50% increase in mill throughput, 15% increase in peak mine rate, lower cut-off grade of 0.30 g/t Au compared to 0.35 g/t Au in the PEA, lower strip ratio of 5.1 and increased mill gold recovery.
- Low capital intensity: Initial capital ("CAPEX") of C$435 million including mine preproduction, processing, and infrastructure (roads, power distribution, tailings facility, ancillary buildings, and water management). Capital intensity ratio ("NPV/CAPEX") of 1.1x per dollar invested.
- Competitive cost profile and rapid payback: All-in-Sustaining Cost ("AISC") of US$882 per ounce, a post-tax payback of 3.5 years, with C$1,971 million EBITDA and C$760 million post-tax free cash flow over the life of mine ("LOM").
- Optimization and exploration upside towards Feasibility Study in 2023: Well-funded to perform trade-off studies assessing new technologies including autonomous haulage and trolley assist mine fleet that may impact project economics and reduce environmental footprint. Additionally, O3 Mining will continue with a brownfield exploration program on Marban Engineering including the expansion of all lateral extensions of the near-surface mineralization, unlock the potential in the Hygrade Fold area (North-West of Kierens pit) as well as the downdip extension of the Marban deposit.
Jose Vizquerra , President and CEO, states: "We are pleased with the results of our PFS for the Marban Engineering Project which demonstrates the potential to be the next gold producer in the Abitibi region in Val-d'Or, Quebec , the next step in delivering on our promise to be in production by 2026. With robust economics, Marban has shown itself to be a profitable standalone project. Using a long-term gold price of US$1,700 oz gold, the project has a post-tax unlevered IRR of 23.2% well above the 15% IRR investment threshold used by many larger gold miners, and a post-tax NPV of C$463M as well as an NPV/CAPEX ratio of 1.1x, with an AISC of US$882 per ounce. This is a key achievement in an inflationary environment in which mining companies are seeing higher cost increases. The project has an improved production profile of over 160,000 oz Au annually, for an approximately 10-year life of mine compared with our 2020 PEA. We believe the opportunity to grow Marban remains high, with many mineralized zones not included in the Mineral Resource Estimate, which could add to the LOM, and further improve Marban's economics. Current drilling at the Hygrade Fold area (North-west of Kierens pit) has the potential to add to the current resource within the greater Marban Engineering Project. We have the privilege to be developing Marban in a jurisdiction that has a green-powered grid with 99.6% renewable power and that has a strong carbon policy. Compared to other jurisdictions developing gold mines, Quebec's carbon intensity is one of the lowest in the world. Work on the feasibility-level studies has begun which we expect to complete in 2023. O3 Mining continues to deliver on all milestones and stated goals as we continue our progress towards production, and creating fundamental value with the Marban project for our shareholders and other stakeholders."
O3 Mining Webinar to be held on
September 6
th
, 2022 at
11:00 a.m. EST
–
REGISTER HERE
Marban Engineering PFS Presentation available here:
VRIFY Presentation
The Marban project is located between the cities of Malartic and Val d'Or in the Abitibi gold district of Québec, Canada . The project area contains six past-producing mines, which collectively produced 585,000 ounces of gold between 1959 and 1992. The land package owned by O3 Mining, in the heart of these mining camps, covers 125 square kilometres and is located 12 kilometres from the Canadian Malartic Mine and along the same shear structure as Wesdome Gold Mine's Kiena deposit.
- The PFS is based on the updated Mineral Resource Estimate ("MRE") from March 1, 2022 (see press release).
- The PFS project team was led by Ausenco Engineering Canada Inc. ("Ausenco"), an industry leader in cost-effective design and construction. Ausenco was supported by G Mining Services ("G Mining") and WSP Canada ("WSP").
The economic analysis was performed assuming a 5% discount rate. On a pre-tax basis, the NPV is $775 million , the IRR is 30.2% and the payback period is 2.8 years. On a post-tax basis, the NPV is $463 million , the IRR is 23.2% and the payback period is 3.5 years. A summary of the project economics is listed in Table 1 and shown graphically in the figures below.
Table 1: Summary of project economics
|
General |
||
|
Gold Price |
US$/oz |
$1,700 |
|
Exchange Rate |
US$:C$ |
$0.77 |
|
Mine Life |
years |
9.6 |
|
Total Waste Tonnes Mined |
kt |
286,144 |
|
Total Mill Feed Tonnes |
kt |
56,436 |
|
Strip Ratio |
w:o |
5.1 |
|
Production |
|
|
|
Mill Head Grade LOM |
g/t |
0.91 |
|
Mill Recovery Rate |
% |
94.2 |
|
Total Mill Ounces Recovered |
koz |
1,552 |
|
Total Annual Average Production |
koz |
161 |
|
Operating Costs |
||
|
Mining Cost |
C$/t Mined |
$2.6 |
|
Mining Cost |
C$/t Milled |
$15.9 |
|
Processing Cost |
C$/t Milled |
$7.8 |
|
G&A Cost |
C$/t Milled |
$1.4 |
|
Total Operating Costs |
C$/t Milled |
$25.1 |
|
Refining & Transport Cost |
C$/oz |
$2.5 |
|
Cash Costs* |
US$/oz |
$723 |
|
AISC** |
US$/oz |
$882 |
|
Capital Costs |
||
|
Initial Capital |
C$M |
$435 |
|
Sustaining Capital |
C$M |
$283 |
|
Closure Costs |
C$M |
$49 |
|
Salvage Value |
C$M |
$10 |
|
Financials - Pre Tax |
||
|
NPV (5%) |
C$M |
$775 |
|
IRR |
% |
30.2 |
|
Payback |
years |
2.8 |
|
Financials - Post Tax |
||
|
NPV (5%) |
C$M |
$463 |
|
IRR |
% |
23.2 |
|
Payback |
years |
3.5 |
|
Notes |
|
* Cash costs consist of mining costs, processing costs, mine-level general & administrative expenses and refining charges and royalties. |
|
** AISC includes cash costs plus sustaining capital, closure cost and salvage value. |
Figure 1: Projected Annual and Cumulative LOM Post-Tax Unlevered Free Cash Flow
Figure 2: Projected LOM Production (Koz)
A sensitivity analysis was conducted on the base case after-tax NPV and IRR of the Marban project, using the following variables: gold price, total CAPEX (initial + sustaining), total operating cost, and US$:C$ exchange rate. The tables below provide a summary.
Table 2a: Post-Tax NPV (5%) Sensitivity, C$M
|
Gold Price
|
Base Case |
Total
Capex
|
Total
Capex
|
Opex
|
Opex
|
FX
|
FX
|
|
$1,500 |
$281 |
$345 |
$217 |
$348 |
$213 |
$148 |
$411 |
|
$1,600 |
$373 |
$438 |
$309 |
$437 |
$306 |
$232 |
$510 |
|
$1,700 |
$463 |
$527 |
$398 |
$526 |
$398 |
$316 |
$606 |
|
$1,800 |
$552 |
$616 |
$487 |
$614 |
$488 |
$398 |
$703 |
|
$1,900 |
$639 |
$704 |
$575 |
$701 |
$577 |
$478 |
$798 |
Table 2b : Post-Tax IRR Sensitivity
|
Gold Price
|
Base Case |
Total
Capex
|
Total
Capex
|
Opex
|
Opex
|
FX
|
FX
|
|
$1,500 |
16.4 % |
20.2 % |
13.2 % |
19.1 % |
13.6 % |
11.1 % |
21.2 % |
|
$1,600 |
19.9 % |
24.0 % |
16.5 % |
22.4 % |
17.3 % |
14.5 % |
24.8 % |
|
$1,700 |
23.2 % |
27.5 % |
19.6 % |
25.6 % |
20.8 % |
17.9 % |
28.1 % |
|
$1,800 |
26.4 % |
31.0 % |
22.5 % |
28.7 % |
24.0 % |
21.0 % |
31.4 % |
|
$1,900 |
29.4 % |
34.2 % |
25.3 % |
31.6 % |
27.2 % |
23.9 % |
34.5 % |
The PFS is based on the Open Pit Indicated portion of the Marban Mineral Resource Estimate, as published in "Marban Engineering NI 43-101 Technical Report & Mineral Resource Estimate".
The Proven and Probable Ore Reserves for the Marban project are estimated at 56.4 Mt at an average grade of 0.91 g/t Au for 1,807 Koz of contained gold at 0.3 g/t Au cut-off grade as summarized in Table 3. The Mineral Reserve is included within the Mineral Resource.
Table 3: Open-Pit Mineral Reserve (effective date August 17, 2022 )
|
Category |
Tonnage
|
Grade
|
Contained Gold (Koz) |
|
Proven |
- |
- |
- |
|
Probable |
56,437 |
0.91 |
1,807 |
|
Proven and Probable |
56,437 |
0.91 |
1,807 |
|
Notes: |
|
1. The Mineral Reserve is estimated using the Canadian Institute of Mining, Metallurgy and Petroleum (CIM), Estimation of Mineral Resources & Mineral Reserves Best Practice Guidelines (November 29, 2019) and CIM Definition Standards for Mineral Resources & Mineral Reserves, May 19th, 2014. |
|
2. The Qualified Person for the estimate is Mr. Carl Michaud, Eng. M.B.A., Vice President of Mining Engineering for GMS. Effective date of the estimate is August 17, 2022. |
|
3. Mineral reserves are estimated for a long-term gold price of US$ 1,600/oz. |
|
4. Mineral reserve cut-off grade is 0.3 g Au/t for all materials. |
|
5. A dilution skin width of 1 metre was considered resulting in an average mining dilution of 5.4%. |
|
6. The average strip ratio is 5.07:1. |
|
7. Numbers may not add due to rounding. |
The Marban Engineering project will be mined with a conventional drill, blast, and haul setup. The project is split into three mining pit groups: Marban, Norlartic, and Kierens which are further split into nine sub pits and phases.
- The peak mining rate is 52.3 million tonnes per year over a mine life of 9.6 years.
- A total of 56.4 million tonnes (Mt) of ore will be mined at an average grade of 0.91 g/t, with a total of 286.1 Mt of waste mined, resulting in a stripping ratio of 5.07 tonnes waste per tonne of ore.
- The primary production equipment includes 16 m 3 electric production shovels and 150 tonne off highway mining trucks augmented by a smaller overburden focused secondary fleet of 100 tonne trucks and 5 m 3 excavators.
- Stockpile rehandling is minimal with a peak inventory of low-grade material consisting of 0.5 Mt in Production Year 7.
Special considerations are made in the mine plan to mine out the smaller northern pits (Kierens and Norlartic) early to allow in-pit deposition of the processing plant tailings and reduce the project footprint.
Ta ble 4: PFS Mine Plan Production Summary
|
Parameter |
Units |
Life of Mine |
Y-2 |
Y-1 |
Y1 |
Y2 |
Y3 |
Y4 |
Y5 |
Y6 |
Y7 |
Y8 |
Y9 |
Y10 |
|
Total Tonnage Mined |
000 t |
×
|